HUAYE-1101 Hot Vulcanizing Cement — Conveyor Belt Vulcanizing Solution
HUAYE-1101 is a flame-retardant hot vulcanizing cement brushed onto belt and rubber surfaces before hot splicing. As a conveyor belt vulcanizing solution, it promotes strong bonding between the belt carcass or steel cord and the uncured rubber sheet — with high initial tack for fast, accurate positioning before the splice is closed up.
- Fast initial tack — quick positioning before curing
- Low viscosity, good surface penetration
- Flame retardant safety design
- Operating range: −35°C to 150°C
HUAYE-1101 is a flame-retardant hot vulcanizing cement used to prepare belt and rubber surfaces before hot splicing. As a conveyor belt vulcanizing solution, it is brushed onto the cleaned, sanded surface of the belt carcass, steel cord, or uncured rubber sheet — promoting a strong bond once the splice is cured. Suitable for fabric, nylon, polyester, and steel cord conveyor belts.
Key Features
- High initial tack, fast evaporation — allows quick, accurate positioning before the splice is closed up
- Low viscosity, good penetration — soaks into the prepared surface for a stronger bond
- Flame retardant — built-in safety for demanding work environments
- Wide operating range — performs from −35°C to 150°C
Technical Specifications
| Appearance | Black viscous liquid |
|---|---|
| Peel Strength | 125 N/25mm |
| Viscosity | ≥200 MPa·s |
| Operating Temperature Range | −35°C to 150°C |
| Flame Retardant | Yes |
| Storage Life | 12 months (sealed, cool & dry storage) |
| Standard Packaging | 1 kg per bucket, 12 buckets per carton |
Figures above were obtained under standard laboratory conditions. Actual performance may vary depending on surface condition, curing conditions, storage, and transport. For critical applications, we recommend a small trial application or contacting us for technical guidance before full-scale use.
How to Apply
- Clean and sand the surface of the belt carcass, steel cord, or uncured rubber sheet to be bonded.
- Wipe away dust with a cleaning agent and allow the surface to air dry.
- Brush HUAYE-1101 evenly onto the prepared surface — two coats.
- Once mostly dry to the touch, bond the uncured rubber sheet onto the treated surface as required by your splicing procedure.
Handling Notes
Store in sealed, dry conditions.
Ensure good ventilation at the application site during use.
Avoid skin and eye contact before the product has cured. If splashed into eyes, rinse immediately with plenty of clean water and seek medical attention.
Keep away from children.
Shelf life is 12 months when stored under the above conditions.
Frequently Asked Questions
What is HUAYE-1101 hot vulcanizing cement used for?
HUAYE-1101 is a conveyor belt vulcanizing solution brushed onto belt and rubber surfaces to promote bonding before hot splicing. It’s used on fabric, nylon, polyester, and steel cord conveyor belts.
Is HUAYE-1101 flame retardant?
Yes, HUAYE-1101 is a flame-retardant hot vulcanizing cement, designed with safety in mind for industrial splicing environments.
How is HUAYE-1101 applied?
Clean and sand the surface to be bonded, wipe away dust, then brush on two even coats. Once mostly dry, bond the uncured rubber sheet onto the treated surface following your splicing procedure.
What is the operating temperature range?
HUAYE-1101 performs across a wide operating range of −35°C to 150°C.
How should HUAYE-1101 be stored and handled?
Store sealed in a dry place, with good ventilation at the application site. Avoid skin and eye contact before curing — rinse thoroughly with water and seek medical attention if splashed into eyes. Shelf life is 12 months.
Need HUAYE-1101 Vulcanizing Cement for Your Next Splice?
Tell us your belt type and quantity needed — we’ll confirm availability, pricing, and shipping to your location.
Chat with Peter Zhang on WhatsApp