Conveyor Belt Connectors & Repair Adhesives for Mining, Port & Industrial Operations
When a conveyor belt splice fails, every hour of downtime costs production. HUAYE BELT supplies mechanical connectors and cold-bonding & hot-melt repair compounds so your maintenance team can respond fast — without compromising on reliability.
15 Min
Surface Cure Time (HUAYE-301)
≥38 MPa
Hot-Melt Splice Tensile Strength
−30°C
Cold-Rated Hot-Melt Adhesive
HY5 / HY6
Mechanical Connector Series
Welcome to Huaye Belt, your trusted supplier of high-quality conveyor belt repair adhesive and mechanical connectors.
Contact via WhatsAppBuilt for Your Operating Environment
From open-pit mining to round-the-clock port terminals, our connectors and repair compounds are matched to the demands of real industrial operations.
Mining & Quarrying
Heavy impact, abrasion, and frequent splice repairs. Mechanical connectors and cold-bonding compounds keep belts running between maintenance windows.
Port Logistics & Terminals
Continuous loading schedules leave little room for downtime. Fast-curing repair compounds help get belts back into operation quickly.
Industrial Plant Operations
From bulk material handling to processing lines, our connector and adhesive range supports day-to-day belt maintenance across plant operations.
Repair Cases From the Field
Real splice and repair scenarios from operations using HUAYE BELT connectors and repair compounds.
Longitudinal Rip Repair — Back in Operation the Same Shift
A fabric-core conveyor belt developed a longitudinal rip after a foreign object passed through the loading point. The maintenance team applied HUAYE-1201 hot-melt adhesive on-site — no belt removal required. Surface cure in minutes, belt returned to full load the same shift.
View Product →
Surface Cut & Scratch Repair — Single Technician, Multiple Points
Multiple surface cuts from sharp cargo debris were found across a port terminal belt. HUAYE-3201 gun-applied cold vulcanizing compound allowed one technician to cover all repair points efficiently. Shore A 70–75 hardness after cure matched the original belt cover.
View Product →
Discharge Zone Wear Repair — 6× the Resistance of Standard Rubber
Severe surface wear at a mining conveyor discharge zone had exposed the belt carcass to direct material impact. HZ-801 wear-resistant armor coating was applied on-site. Light load resumed in 15 minutes — and the coating held through the full production cycle.
View Product →What We Supply
Core connector and repair adhesive lines, matched to belt type, operating temperature, and how fast you need to be back in operation.
HY5 & HY6 Connectors
HY5 series for heavy-duty, high-tension applications; HY6 series for flexible belts and small-pulley compatibility.
Learn More →
HUAYE-3201
2-component, gun-applied cold vulcanizing compound. Shore A 70–75 hardness, full operation resumes in 2 hours.
- Hardness: Shore A 70–75
- Full Operation: 2 Hours
HUAYE-1201
Hot-melt granule adhesive — melt in a heated pot and apply, no on-site mixing. Built for continuous loads down to −30°C.
- Tensile Strength: ≥38 MPa
- Compatible: EP, NN, Steel Cord
4 Repair Adhesive Systems
Compare cure time, compatible belt types, and best-use scenarios across our full repair adhesive range.
View Full Comparison →